SL82-000
Note: Print this MSDS | Back to Previous Page | Close Window
Benz Compressed Air Systems Inc
Visitors Address: 1530 Date St · Montebello CA 90640-6325 USA
Mailing Address: PO Box 729 · Montebello CA 90640-0729 USA
Tel: 323-722-6603 · 800-698-4247 · Fax: 323-887-7145
Web: www.selectlubricants.com
Date: 2002-12-01 - Revised: 1997-12-15 - Supersedes: 1997-10-06
I. Product Identification
Trade Name: SL82-000
Chief Constituent: A Linear Ethoxylated Alcohol
Hazardous Ingredients/OSHA: Dipropylene Glycol Monomethyl Ether (OSHA PEL and ACGIH are 100 ppm TWA; 15 ppm STEL)
Carcinogenic Ingredients/OSHA/NTP/IARC: None
Ingredients Regulated by SARA Title 3, Section 313: None
II. Warning Statements
Do not ingest
III. Physical and Chemical Data
Appearance and Odor: Clear blue liquid with distinct odor
Specific Gravity: 1.018
Boiling Point: 212°F
Evaporation Rate: Not determined
Vapor Pressure: Not determined
Solubility in Water: 100%
IV. Fire Protection
Flash Point: None
Extinguishing Media: N/A
Special Firefighting Procedure: None
Unusual Fire Hazard: None
V. Reactivity Data
Thermal Stability: Stable
Materials to Avoid: Oxidizers
Hazardous Polymerization: Will not occur
Hazardous Decomposition Products: None
VI. Health Hazard Data
Exposure Limits: Skin-TLV 100 ppm
Effects of Overexposure: Dry skin, stings eyes. Harmful if swallowed.
VII. Physiological Effects Summary
Acute:
Eyes: Irritant to eyes
Skin: Will dry skin in concentrated forms
Respiratory System: Not determined (avoid breathing mist)
Chronic: N/A
Other: N/A
VIII. Precautions for Safe Handling
For general personal hygiene, wash hands thoroughly after handling material. Avoid contact with skin and eyes. Keep from freezing. If frozen, thaw and agitate before use.
IX. Protection and Control Messages
Protective Equipment: Rubber gloves, splash goggles and eye wash
Respiratory Protection: None
Ventilation: N/A
X. Emergency and First Aid Procedures
Eye Contact: Flush eyes with water for 15 minutes. If irritation develops, call physician.
Skin Contact: Wash skin with soap and water.
Inhalation: Remove to fresh air and if burning persists, call physician.
Ingestion: Take one or two glasses of water and call physician.
XI. Notes
Hazard Rating Information
Key: 0 = Minimal, 1 = Slight, 2 = Moderate, 3 = Serious, 4 = Severe
| Hazard | NPCA/HMIS | NFPA |
| Health Flammability Reactivity |
1 1 0 |
1 1 0 |
XII. Spill and Disposal Procedures
Environmental Impact: Report spills as required to appropriate authorities. U. S. Coast Guard regulations require immediate reporting of spills that could reach any waterway including intermittent dry creeks. Report spill to Coast Guard Toll Free Number 800-424-8802. In case of accident or road spill, notify Chemtrec 800-424-9300.
Procedures if Material is Released or Spilled: Absorb on fire retardant treated sawdust, diatomaceous earth, etc. Shovel up and dispose of at an appropriate waste disposal facility in accordance with current applicable laws and regulations, and product characteristics at time of disposal.
Waste Management: Dispose of according to Federal, State and Local regulations. Toxic Substance Inventory Control Act: All components are included on the TSCA Inventory and are in compliance with the TSCA.
For additional information contact:
Benz Compressed Air Systems Inc
Visitors Address: 1530 Date St · Montebello CA 90640-6325 USA
Mailing Address: PO Box 729 · Montebello CA 90640-0729 USA
Tel: 323-722-6603 · 800-698-4247 · Fax: 323-887-7145
Web: www.selectlubricants.com
Note: Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control. All risks of use of the product are therefore assumed by the user and we expressly disclaim all warranties of every kind and nature, including warranties of merchantability and fitness for a particular purpose in respect to the use or suitability of the product. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users.