SL10-032, SL10-046, SL10-068, SL10-100, SL10-150
Note: Print this PDS | Back to Previous Page | Close Window
Benz Compressed Air Systems Inc
Visitors Address: 1530 Date St · Montebello CA 90640-6325 USA
Mailing Address: PO Box 729 · Montebello CA 90640-0729 USA
Tel: 323-722-6603 · 800-698-4247 · Fax: 323-887-7145
Web: www.selectlubricants.com
Date: 2003-04-24 - Revised: 0000-00-00 - Supersedes: 0000-00-00
SL10 Series lubricants are manufactured from the highest quality PAO (polyalphaolefin) base stocks and advanced additive technology. SL10 Series lubricants are recommended for rotary screw, centrifugal, and reciprocating compressors and offer many advantages over petroleum based lubricants as well as some synthetics, especially where compatibility is an important concern. The SL10 Series lubricants have low pour points, high viscosity indices and excellent water demulsibility.
SL10 Series lubricants are compatible with commonly used seal materials and equipment designed for use with petroleum oils. Consult the Material Compatibility Guide for specific recommendations.
SL10 Series Applications
Select Lubricants SL10-032
is recommended for use in the following applications:
- Centrifugal compressors
- Rotary screw compressors
- Ball and roller bearings
- Low temperature lubrication
- High temperature lubrication
- General lubrication for applications requiring an ISO 32 lubricant
Select Lubricants SL10-046
is recommended for use in the following applications:
- Centrifugal compressors
- Rotary screw compressors
- Ball and roller bearings
- Low temperature lubrication
- High temperature lubrication
- General lubrication for applications requiring an ISO 46 lubricant
Select Lubricants SL10-068
is recommended for use in the following applications:
- Rotary screw and vane compressors
- Small reciprocating compressors
- Ball and roller bearings
- Low temperature lubrication
- High temperature lubrication
- General lubrication for applications requiring an ISO 68 lubricant
Select Lubricants SL10-100
is recommended for use in the following applications:
- Reciprocating and rotary vane compressors
- Ball and roller bearings
- Low temperature lubrication
- High temperature lubrication
- General lubrication for applications requiring an ISO 100 lubricant
Select Lubricants SL10-150
is recommended for use in the following applications:
- Reciprocating and rotary vane compressors
- Ball and roller bearings
- Low temperature lubrication
- High temperature lubrication
- General lubrication for applications requiring an ISO 150 lubricant
Select Lubricants SL50 Series (Polyalphaolefin) Physical Properties
| Products | SL10-032 | SL10-046 | SL10-068 | SL10-100 | SL10-150 | |
| ISO Viscosity Grade | 32 | 46 | 68 | 100 | 150 | |
| Viscosity @ 40°C, cSt | 32.0 | 43.0 | 66.0 | 93.0 | 142 | |
| Viscosity @ 100°C, cSt | 5.80 | 7.20 | 9.80 | 12.5 | 16.3 | |
| Viscosity @ 100°F, SUS | 163 | 220 | 339 | 482 | 737 | |
| Viscosity @ 210°F, SUS | 45.7 | 50.4 | 59.6 | 69.8 | 85.1 | |
| Viscosity Index | 126 | 130 | 132 | 130 | 122 | |
| Specific Gravity | 0.8510 | 0.8546 | 0.8632 | 0.8610 | 0.8899 | |
| Density, lbs/gal | 7.095 | 7.125 | 7.196 | 7.170 | 7.410 | |
| Pour Point | °F/°C | -65/-54 | -55/-48 | -55/-48 | -40/-40 | -40/-40 |
| Flash Point | °F/°C | 495/257 | 500/260 | 495/257 | 500/260 | 500/260 |
| Autoignition Point | °F/°C | 730/388 | 745/396 | 745/396 | 760/404 | 760/404 |
| Emulsion Tendency (Minutes) | 42/38/0(5) | 42/38/0(10) | 43/37/0(15) | 41/39/0(10) | 42/38/0(10) | |
For additional information contact:
Benz Compressed Air Systems Inc
Visitors Address: 1530 Date St · Montebello CA 90640-6325 USA
Mailing Address: PO Box 729 · Montebello CA 90640-0729 USA
Tel: 323-722-6603 · 800-698-4247 · Fax: 323-887-7145
Web: www.selectlubricants.com
Note: Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control. All risks of use of the product are therefore assumed by the user and we expressly disclaim all warranties of every kind and nature, including warranties of merchantability and fitness for a particular purpose in respect to the use or suitability of the product. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users.