Select Lubricants - PDS - Product Data Sheet - SL50 Series Lubricants

SL50-032, SL50-046, SL50-068, SL50-100, SL50-150

Note: Print this PDS | Email this Page | Back to Previous Page | Close Window

Benz Compressed Air Systems Inc
Visitors Address: 1530 Date St · Montebello CA 90640-6325 USA
Mailing Address: PO Box 729 · Montebello CA 90640-0729 USA
Tel: 323-722-6603 · 800-698-4247 · Fax: 323-887-7145
Email: info@selectlubricants.com · Web: www.selectlubricants.com

Date: 2003-04-24 - Revised: 0000-00-00 - Supersedes: 0000-00-00

SL50 Series premium synthetic blend lubricants are a blend of synthetic and petroleum base fluids specially designed for compressor applications and are useful in multi-purpose applications. The SL50 is manufactured using the highest quality base stocks, additive treated with rust and corrosion inhibitors, oxidation control agents, anti-wear compounds and defoamants and is exceptional at controlling sludge and deposits. Please contact your Select Lubricants representative for specific product recommendations.

SL50 Applications

Select Lubricants SL50-032
is recommended for use in the following applications:

Rotary screw and centrifugal compressors

Low temperature lubrication

High temperature lubrication

General lubrication for applications requiring an ISO 32 lubricant

Select Lubricants SL50-046
is recommended for use in the following applications:

Rotary screw and centrifugal compressors

Ball and roller bearings

Low temperature lubrication

High temperature lubrication

Mist lubrication systems

General lubrication for applications requiring an ISO 46 lubricant

Select Lubricants SL50-068
is recommended for use in the following applications:

Rotary screw and vane compressors

Ball and roller bearings

Low temperature lubrication

High temperature lubrication

General lubrication for applications requiring an ISO 68 l

Select Lubricants SL50-100
is recommended for use in the following applications:

Reciprocating and rotary vane compressors

Ball and roller bearings

Low temperature lubrication

High temperature lubrication

General lubrication for applications requiring an ISO 100 lubricant

Select Lubricants SL50-150
is recommended for use in the following applications:

Reciprocating and rotary vane compressors

Ball and roller bearings

Low temperature lubrication

High temperature lubrication

General lubrication for applications requiring an ISO 150 lubricant 38

Select Lubricants SL50 Series (Premium Synthetic Blend) Physical Properties

Products		SL50-032	SL50-046	SL50-068	SL50-100	SL50-150
ISO Viscosity Grade		32	46	68	100	150
Viscosity @ 40°C, cSt		29.6	45.8	63.6	97.1	145.1
Viscosity @ 100°C, cSt		5.12	6.68	8.31	10.97	14.31
Viscosity @ 100°F, SUS		153	237	329	505	760
Viscosity @ 210°F, SUS		43.4	48.6	54.2	63.7	76.7
Viscosity Index		100	97	99	97	96
Pour Point	°F/°C	-30/-34	-30/-34	-30/-34	-25/-32	-25/-32
Flash Point	°F/°C	415/213	445/229	470/243	500/260	505/263
Emulsion Tendency (Minutes)		42/38/0(5)	43/37/0(10)	42/38/0(20)	41/39/0(15)	43/37/0(10)
Four Ball Wear Test mm1200 rpm, 167°F, 40kg		0.54	0.60	0.50	0.50	0.61

For additional information contact:

Note: Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control. All risks of use of the product are therefore assumed by the user and we expressly disclaim all warranties of every kind and nature, including warranties of merchantability and fitness for a particular purpose in respect to the use or suitability of the product. Nothing is intended as a recommendation for uses which infringe valid patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users.